不锈钢电梯门套有两种款式，一种为立边与横边采用45度碰角的形式，还有一种为立边与横边垂直安装，建议用后一种，前一种有时需要焊接碰角，非常麻烦，效果还不佳。常用的不锈钢板材分为201与304两种型号，实际上是成分不一样，304质量好一点，但价格高，201差一点，但作为家用也完全可以满足需要。另外板材厚度也不一样，通常商实际后的0.6的就可以了。

There are two styles of stainless steel elevator door pocket, one is that the vertical edge and horizontal edge adopt the form of 45 degree collision angle, and the other is that the vertical edge and horizontal edge are installed vertically. It is recommended to use the latter one. The former one sometimes needs to weld the collision angle, which is very troublesome and the effect is not good. The commonly used stainless steel plates are divided into two types: 201 and 304. In fact, the components are different. 304 has better quality, but the price is high. 201 is poor, but it can fully meet the needs as a household. In addition, the thickness of the plate is also different, usually 0.6 after quoting the actual.

不锈钢电梯门套施工

Construction of stainless steel elevator door pocket

1、规格：常用的不锈钢板材分为201与304两种型号，实际上是成分不一样，304质量好一点，但价格高，201差一点，但作为家用也完全可以满足需要。另外板材厚度也不一样，通常商实际后的0.6的就可以了。

1. Specification: the commonly used stainless steel plates are divided into two types: 201 and 304. In fact, the components are different. 304 has better quality, but the price is high. 201 is poor, but it can also meet the needs as a household. In addition, the thickness of the plate is also different, usually 0.6 after quoting the actual.

2、表面处理：板材表面处理也分为镜面与油膜拉丝两种，家装通常不建议用镜面不锈钢，油膜拉丝的效果好一点，(即为许多油烟机用的那种材质)。

2. Surface treatment: plate surface treatment is also divided into mirror and oil film wire drawing. Mirror stainless steel is usually not recommended for home decoration. The effect of oil film wire drawing is better (that is, it is the material used by many range hoods).

3、门套样式：现在不锈钢电梯门套有两种款式，一种是立边与横边采用45度碰角的形式，还有一种是立边与横边垂直安装，建议用后一种，前一种有时需要焊接碰角，很麻烦，效果还不佳。

3. Door pocket style: now there are two styles of stainless steel elevator door pocket. One is that the vertical edge and horizontal edge are in the form of 45 degree collision angle, and the other is that the vertical edge and horizontal edge are installed vertically. It is recommended to use the latter one. The former one sometimes needs to weld the collision angle, which is very troublesome and the effect is not good.

4、基础制作：可以用9厘板当作门套内衬，倘若瓦工手艺好，也能够省去这一步，直接把墙赵平就可以了。

4. Basic production: 9 cm board can be used as the door pocket lining. If the bricklayer is good, this step can be omitted and the wall can be directly Zhaoping.

5、测量：因为家装用量少，所以商家一般不去上门测量，这时需要tx们自己动手测量了，测量时一定要**至毫米。

5. Measurement: because the amount of home decoration is small, businesses generally do not go to the door for measurement. At this time, TX people need to measure by themselves. When measuring, it must be * * to mm.

6、加工：选一家有弯板机的店，将样式确定，谈好价钱，人家就上门测量尺寸，加工特别快。

6. Processing: choose a shop with bending machine, determine the style and negotiate the price. People will come to the door to measure the size. The processing is very fast.

不锈钢电梯门套安装：通常商家不给安装，需要自己动手，不过，加工后的不锈钢边缘非常锋利，小心别让手割伤，用玻璃胶粘贴或封边就行了。完成后撕掉白色?；つぞ涂梢粤恕?/div>